Automatic Filter Cake Drying Equipment

• Material Status: Powder
• Structure: Closed Type
• Operation Pressure: Atmospheric Pressure
• Inlet Temperature: High Temperature
• Type: Large
• Water Withdrawal/H: 208kg
• Model NO.: DW5000FL
• According Calculate Operating Power/H: 47.3 Kw
• Press Calculate Operating Power / H: 54.7 Kw
• Actual Distribution Power: 68kw
• Drying Module: 1
• Number of Compressors: 4
• Processing Capacity / Day: 11.7t
• Warranty: 1 Year
• Transport Package: International Standard Packing
• Specification: Standard water withdrawal/24H: 5000kg
• Trademark: LEABON
• Origin: Henan, China
• Production Capacity: 20sets/Month

Product Description

Automatic Filter Cake Drying Equipment

Introduction:
The running process does not produce dust,waste gas,which makes it the best environment protection drying equipment at present.


Parameters
(Closed Type low temperature filter cake dehumidifier-1 (no heat source):

Model	DW5000FL	DW10000FL	DW15000FL	DW20000FL	DW25000FL
Standard water withdrawal/24H	5000kg	10000kg	15000kg	20000kg	25000kg
Water withdrawal/H	208kg	416kg	624 kg	832 kg	1040 kg
According Calculate operating power/H	47.3 kw	94.5kw	141.8kw	189.1kw	226.4kw
Press   Calculate operating power / H	54.7 kw	109.5kw	164.2kw	218.9kw	273.7kw
Actual distribution power	68kw	128kw	188kw	247kw	308kw
Drying module	1	2	3	4	5
Number of compressors	4	8	12	16	20
Processing capacity / day	11.7t	23.4t	35.1t	46.8t	58.5t
Energy consumption per ton (60% → 30%)	112.2kw.h
Processing capacity (80% → 30%) / day	7t	14t	21t	28t	35t
Energy consumption per ton (80% → 30%)	162.1 kw.h

Product advantages:
1. R&D and testing started in 2013 and put into market use in 2017.
2. Suitable for materials with moisture content of 55%-83%, the moisture content of the discharge is 3%-50% freely adjustable, and the reduction is over 80%.
3, fully enclosed structure, no odor emission.
4, 40 ° C -78 ° C low temperature work, more safe, no dust hazard.
5, closed system combined with heat recovery technology, no heat loss.
6, high-strength anti-corrosion materials, stable and durable, not affected by the environment.
7. The civil engineering requirements for the drying workshop are simple; (the dryer base is 250mm above the ground, and the condensate flows out by its own weight.
The basic flatness requirement of the dryer is less than 5cm, and the basic load-bearing requirements are: dynamic load 1.4 tons/square meter).
8. The drying process takes about 60-120 minutes to reach Pasteur (Pap) sterilization conditions, effectively killing more than 90% of E. coli.
9, electric energy drying: 1 degree of electrical energy output 2.5-5 kg of water.
Dry heat drying: 1-1.2 tons of steam is required to produce 1 ton of water.

Application 

Our Service

1. supply the free material testing in laboratory and give out the report for free. 
2. supply free model selection according to your capacity and other information.
3. supply manual operation to insturct the operation.
4. supply  installation instruction. 
5. supply full set of  filtration solution . We have top pump , valve , motor agreement supplier , can give you turnkey service.

Hot Sale Product

FAQ:

1. How to buy your interested products?
You can provide us the water sources, water quality, flow rate and ground area, material requirements about your project (More details, please contact us).
2. How to pay? 
L/C or T/T are acceptable. 
3. What is the delivery time?
It depends on order quantities. Generally speaking, the delivery time will be within 2 months.
4. How to pack the products?
We use standard export package. If you have special package requirements, we will pack as you required, but the fees will be paid by customers.
5. How to install after the equipment arriving destination?
We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you.
6. How long is the validity?
The validity is 12 months after installation.